Hose Fittings Manufacturers Introduces The Relevant Knowledge Of Industrial Hoses


Hose Fittings Manufacturers introduces rubber hoses, which are steel wire braided hoses. The hose is composed of an inner rubber layer, a steel wire braided layer and an outer rubber layer. It is suitable for conveying hydraulic fluids, such as alcohol, fuel oil, lubricating oil, emulsion and so on. Divided into industrial beverages.

The application field of industrial hose covers various industrial manufacturing and circulation fields, and is widely used in petroleum, chemical, shipbuilding, dock, tanker, agriculture, food, beverage, medicine and other industries, as well as cold and hot water, steam, ventilation, cooling, and fire fighting. , Hydraulics, media such as air, water, fog, muddy water, sand, iron particles, etc.

Beverage hoses are mainly used in peristaltic pump tubes for biological ingredients beverages, especially designed and produced for critical fluids and peristaltic pumps. The hose is translucent and flexible, suitable for fluid processing equipment.

Through the above introduction, Hydraulic Fittings Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.cnshunda.com/

Hydraulic Fittings Manufacturers Introduces The Installation Requirements Of Hydraulic Oil Filters



Hydraulic Fittings Manufacturers introduced the failure of hydraulic oil filters. In specific operations, due to various reasons, the most common failure is the occurrence of leakage. The main reason for this is that the seal fails, and there are many reasons for the seal failure. In practical applications, improper installation is the main cause of seal failure.

When assembling, forcing the seal to cut edges and breaks, the direction of the seal is reversed, and the O-ring is squeezed and twisted, etc., will cause the seal to fail.

At the same time, special attention should be paid to the cleanliness of the sealing surface when installing the seal, especially in the case of relatively bad working environment, when the user disassembles the filter due to replacement of the filter element and other reasons, the contaminants adhering to the sealing surface may cause Seal failure, these require users to pay more attention to the installation process.

In addition, the quality of the seal itself is also the main cause of filter leakage. Since the transportation and storage of seals require specific environmental and age rules, users should pay special attention to whether the seals are deformed (such as size changes), deterioration (such as peculiar smell), aging (such as hardness changes), and the appearance of scratches to avoid installation Then the filter leaks again.


In the application of hydraulic oil filter, the degree of filtration should meet the predetermined requirements and be able to maintain sufficient current for a long time. The filter element has sufficient strength and will not be damaged by hydraulic pressure. The filter element has good corrosion resistance and can work for a long time at room temperature.

www.cnshunda.com