3 Tips for Excavator Owners and Operators
Check your excavator’s air cleaner every 8 hours.
Excavators are the workhorses of construction sites, and they’re used for all kinds of jobs. They can be found in many other industries as well, including mining and quarrying.
They’re also used for landscaping work, such as grading and drainage projects. While you may think that an excavator is a simple machine, there are a lot of components that need regular maintenance. Here are some tips to get you started:
Check your excavator’s air cleaner every 8 hours. The air cleaner filters out dust and debris from the air intake system. If you don’t regularly clean it, then it will clog up with dust and debris, which can cause damage to the engine.
Keep an eye on your fuel gauge. If you notice that it’s running low on fuel before you finish a job or drive to another site, then stop immediately so you don’t damage your equipment by running out of gas while using it! You should also always make sure that there is enough fuel before leaving a job site so that you don’t have any problems getting back home!
Check your excavator’s oil and coolant levels daily.
How often do you check the oil in your excavator? If it has been a while, now is a great time to change it.
Here are three tips for excavator owners and operators:
Check your excavator’s oil and coolant levels daily. If they are low, add more immediately. It takes only seconds to do so, but it can take hours or days to diagnose an engine failure caused by running out of lubricant.
Always use high-quality oil with the proper viscosity rating (measured in cSt). Using an incorrect viscosity can cause premature wear on critical engine parts like pistons and cylinder liners, which leads to expensive replacement costs down the road.
Inspect hoses and belts regularly for signs of wear or damage (i.e., cracks). This should be done before each shift begins as well as during regular maintenance checks.
Check the upper structure, cab, and hood for damage and loose components everyday.
If you're driving a large piece of machinery like an excavator, it's important to keep an eye on the condition of your machine. Not only is it a safety issue, but if there's something wrong with your vehicle, you could end up damaging the machine or injuring yourself.
Here are three tips for excavator owners and operators:
Check the upper structure, cab, and hood for damage and loose components everyday. If there's any damage or loose parts that need to be fixed immediately, do so before starting up the excavator again.
Check all hydraulic hoses every time you use your excavator. The hydraulic fluid can deteriorate over time due to weather conditions, so inspect them regularly for cracks and leaks.
Have your engine tuned up every year or two depending on how often you use it.https://komatsuvscat.com/
Check your excavator’s air cleaner every 8 hours.
Excavators are the workhorses of construction sites, and they’re used for all kinds of jobs. They can be found in many other industries as well, including mining and quarrying.
They’re also used for landscaping work, such as grading and drainage projects. While you may think that an excavator is a simple machine, there are a lot of components that need regular maintenance. Here are some tips to get you started:
Check your excavator’s air cleaner every 8 hours. The air cleaner filters out dust and debris from the air intake system. If you don’t regularly clean it, then it will clog up with dust and debris, which can cause damage to the engine.
Keep an eye on your fuel gauge. If you notice that it’s running low on fuel before you finish a job or drive to another site, then stop immediately so you don’t damage your equipment by running out of gas while using it! You should also always make sure that there is enough fuel before leaving a job site so that you don’t have any problems getting back home!
Check your excavator’s oil and coolant levels daily.
How often do you check the oil in your excavator? If it has been a while, now is a great time to change it.
Here are three tips for excavator owners and operators:
Check your excavator’s oil and coolant levels daily. If they are low, add more immediately. It takes only seconds to do so, but it can take hours or days to diagnose an engine failure caused by running out of lubricant.
Always use high-quality oil with the proper viscosity rating (measured in cSt). Using an incorrect viscosity can cause premature wear on critical engine parts like pistons and cylinder liners, which leads to expensive replacement costs down the road.
Inspect hoses and belts regularly for signs of wear or damage (i.e., cracks). This should be done before each shift begins as well as during regular maintenance checks.
Check the upper structure, cab, and hood for damage and loose components everyday.
If you're driving a large piece of machinery like an excavator, it's important to keep an eye on the condition of your machine. Not only is it a safety issue, but if there's something wrong with your vehicle, you could end up damaging the machine or injuring yourself.
Here are three tips for excavator owners and operators:
Check the upper structure, cab, and hood for damage and loose components everyday. If there's any damage or loose parts that need to be fixed immediately, do so before starting up the excavator again.
Check all hydraulic hoses every time you use your excavator. The hydraulic fluid can deteriorate over time due to weather conditions, so inspect them regularly for cracks and leaks.
Have your engine tuned up every year or two depending on how often you use it.https://komatsuvscat.com/
3 Tips for Excavator Owners and Operators
Check your excavator’s air cleaner every 8 hours.
Excavators are the workhorses of construction sites, and they’re used for all kinds of jobs. They can be found in many other industries as well, including mining and quarrying.
They’re also used for landscaping work, such as grading and drainage projects. While you may think that an excavator is a simple machine, there are a lot of components that need regular maintenance. Here are some tips to get you started:
Check your excavator’s air cleaner every 8 hours. The air cleaner filters out dust and debris from the air intake system. If you don’t regularly clean it, then it will clog up with dust and debris, which can cause damage to the engine.
Keep an eye on your fuel gauge. If you notice that it’s running low on fuel before you finish a job or drive to another site, then stop immediately so you don’t damage your equipment by running out of gas while using it! You should also always make sure that there is enough fuel before leaving a job site so that you don’t have any problems getting back home!
Check your excavator’s oil and coolant levels daily.
How often do you check the oil in your excavator? If it has been a while, now is a great time to change it.
Here are three tips for excavator owners and operators:
Check your excavator’s oil and coolant levels daily. If they are low, add more immediately. It takes only seconds to do so, but it can take hours or days to diagnose an engine failure caused by running out of lubricant.
Always use high-quality oil with the proper viscosity rating (measured in cSt). Using an incorrect viscosity can cause premature wear on critical engine parts like pistons and cylinder liners, which leads to expensive replacement costs down the road.
Inspect hoses and belts regularly for signs of wear or damage (i.e., cracks). This should be done before each shift begins as well as during regular maintenance checks.
Check the upper structure, cab, and hood for damage and loose components everyday.
If you're driving a large piece of machinery like an excavator, it's important to keep an eye on the condition of your machine. Not only is it a safety issue, but if there's something wrong with your vehicle, you could end up damaging the machine or injuring yourself.
Here are three tips for excavator owners and operators:
Check the upper structure, cab, and hood for damage and loose components everyday. If there's any damage or loose parts that need to be fixed immediately, do so before starting up the excavator again.
Check all hydraulic hoses every time you use your excavator. The hydraulic fluid can deteriorate over time due to weather conditions, so inspect them regularly for cracks and leaks.
Have your engine tuned up every year or two depending on how often you use it.https://komatsuvscat.com/
0 Comments
0 Shares
946 Views
Arabic
French
Spanish
Portuguese
Deutsch
Turkish
Dutch
Italiano
Russian
Romaian
Portuguese (Brazil)
Greek