2 Way Ball Valves/3 Way Ball Valves Factory Introduces The Use Of Pneumatic Ball Valves
2022-3-24
Pneumatic ball valves are mainly used in pipelines to cut off fast, distribute and change the flow direction of the medium. Pneumatic ball valve is a new type of valve that has been widely used in recent years. 2 Way Ball Valves/3 Way Ball Valves Factory introduces that pneumatic ball valve has the following advantages:
1. The fluid resistance is small, and its resistance coefficient is equal to the pipe section of the same length.
2. Simple structure, small size and light weight.
3. Tight and reliable. At present, the sealing surface material of the ball valve is widely used in plastic, which has good sealing performance, and has also been widely used in vacuum systems.
4. Easy to operate, open and close quickly, just rotate 90° from fully open to fully closed, which is convenient for long-distance control.
5. The maintenance is convenient, the pneumatic ball valve has a simple structure, the sealing ring is generally movable, and it is more convenient to disassemble and replace.
6. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the sealing surface of the valve will not be eroded when the medium passes through.
7. Wide range of applications, diameters ranging from small to several millimeters, large to several meters, and can be applied from high vacuum to high pressure.
8. Because the power source of the pneumatic ball valve is gas, the pressure is generally 0.2-0.8MPa, which is relatively safe. If the pneumatic ball valve leaks, compared with hydraulic and electric, the gas can be discharged directly, which does not pollute the environment and has high safety.
9. Compared with manual and turbine rotating ball valves, pneumatic ball valves can be configured with large diameters (manual and turbine rotating ball valves are generally below DN300 diameter, and pneumatic ball valves can currently reach DN1200 diameter.)
Through the above introduction, Mining Ball Valves Company hopes that you can simply refer to the content of this article in future use.
https://www.hydraulicballvalve.net/
2022-3-24
Pneumatic ball valves are mainly used in pipelines to cut off fast, distribute and change the flow direction of the medium. Pneumatic ball valve is a new type of valve that has been widely used in recent years. 2 Way Ball Valves/3 Way Ball Valves Factory introduces that pneumatic ball valve has the following advantages:
1. The fluid resistance is small, and its resistance coefficient is equal to the pipe section of the same length.
2. Simple structure, small size and light weight.
3. Tight and reliable. At present, the sealing surface material of the ball valve is widely used in plastic, which has good sealing performance, and has also been widely used in vacuum systems.
4. Easy to operate, open and close quickly, just rotate 90° from fully open to fully closed, which is convenient for long-distance control.
5. The maintenance is convenient, the pneumatic ball valve has a simple structure, the sealing ring is generally movable, and it is more convenient to disassemble and replace.
6. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the sealing surface of the valve will not be eroded when the medium passes through.
7. Wide range of applications, diameters ranging from small to several millimeters, large to several meters, and can be applied from high vacuum to high pressure.
8. Because the power source of the pneumatic ball valve is gas, the pressure is generally 0.2-0.8MPa, which is relatively safe. If the pneumatic ball valve leaks, compared with hydraulic and electric, the gas can be discharged directly, which does not pollute the environment and has high safety.
9. Compared with manual and turbine rotating ball valves, pneumatic ball valves can be configured with large diameters (manual and turbine rotating ball valves are generally below DN300 diameter, and pneumatic ball valves can currently reach DN1200 diameter.)
Through the above introduction, Mining Ball Valves Company hopes that you can simply refer to the content of this article in future use.
https://www.hydraulicballvalve.net/
2 Way Ball Valves/3 Way Ball Valves Factory Introduces The Use Of Pneumatic Ball Valves
2022-3-24
Pneumatic ball valves are mainly used in pipelines to cut off fast, distribute and change the flow direction of the medium. Pneumatic ball valve is a new type of valve that has been widely used in recent years. 2 Way Ball Valves/3 Way Ball Valves Factory introduces that pneumatic ball valve has the following advantages:
1. The fluid resistance is small, and its resistance coefficient is equal to the pipe section of the same length.
2. Simple structure, small size and light weight.
3. Tight and reliable. At present, the sealing surface material of the ball valve is widely used in plastic, which has good sealing performance, and has also been widely used in vacuum systems.
4. Easy to operate, open and close quickly, just rotate 90° from fully open to fully closed, which is convenient for long-distance control.
5. The maintenance is convenient, the pneumatic ball valve has a simple structure, the sealing ring is generally movable, and it is more convenient to disassemble and replace.
6. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the sealing surface of the valve will not be eroded when the medium passes through.
7. Wide range of applications, diameters ranging from small to several millimeters, large to several meters, and can be applied from high vacuum to high pressure.
8. Because the power source of the pneumatic ball valve is gas, the pressure is generally 0.2-0.8MPa, which is relatively safe. If the pneumatic ball valve leaks, compared with hydraulic and electric, the gas can be discharged directly, which does not pollute the environment and has high safety.
9. Compared with manual and turbine rotating ball valves, pneumatic ball valves can be configured with large diameters (manual and turbine rotating ball valves are generally below DN300 diameter, and pneumatic ball valves can currently reach DN1200 diameter.)
Through the above introduction, Mining Ball Valves Company hopes that you can simply refer to the content of this article in future use.
https://www.hydraulicballvalve.net/
0 Comentários
0 Compartilhamentos
195 Visualizações
English
Arabic
French
Spanish
Portuguese
Deutsch
Turkish
Dutch
Italiano
Russian
Romaian
Greek