3D Embossed Fabric Wholesaler Introduces The Use Details Of Seersucker Fabric 3D Embossed Fabric Wholesaler introduces Seersucker is a thin fabric woven in a plain weave, and the surface of the cloth is concave and convex. Seersucker has a unique appearance, a strong three-dimensional effect, a light and thin texture, a soft hand, and is not close to the body, cool and comfortable, and does not need to be ironed after washing. According to the principle of forming bubbles, seersucker is mainly divided into weaving seersucker, alkali shrunk seersucker and so on. The raw material for weaving seersucker is made of pure cotton or polyester/cotton yarn, and the density of the bubble warp is greater than that of the ground warp, or the bubble warp is made of strands and the ground warp is made of single yarn. When weaving, the let-off volume of the bubble warp is greater than that of the ground warp, and then the cell warp is dyed and processed loosely to form beautiful, uneven bubbles. The woven seersucker has better bubble fastness. Alkaline seersucker is based on the principle that cotton fiber encounters concentrated lye to increase its diameter and shorten its length. Alkaline seersucker is a dyed or printed pure cotton fine plain weave fabric base. According to the design requirements, the lye is printed on the surface of the fabric, so that the surface of the fabric is formed with an lye part and a lye-free part, and a lye part is formed. The surface shrinks, and the cloth surface of the lye-free part does not shrink, forming uneven bubbles. The bubble fastness of alkaline shrunken seersucker is poor, and the bubble fastness is improved after finishing with resin. In addition, two fibers with different shrinkage properties can be spun into yarns separately, arranged at intervals, after weaving, dyeing and finishing, the yarns shrink differently, and uneven bubbles are formed on the cloth surface. This seersucker has good bubble fastness. According to different printing and dyeing methods, it can be divided into dyed seersucker, printed seersucker, and yarn-dyed seersucker. Seersucker is mainly used as fabrics for women's and children's summer dresses, as well as decorative articles such as bedspreads and curtains. When washing seersucker, it is not advisable to use hot water to soak, scrub and twist hard, and do not need to iron after washing, so as not to affect the bubble fastness. Through the above introduction, Printing Fabric Factory hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/