https://www.snipershide.com/shooting/threads/390-grain-hornady-a-tip-load-development-375-cheytac.7089759/page-3#post-10746086

Feb 14, 2023
#127
secondofangle2 said:
Excessive twist is a fool’s pursuit. I know u said not your rifle. But in general
Gents, I have recently won some competitions in ELR 1 and 2 mile with my .375 CT, setup is as follows:

VICTRIX factory .375 CT THRONE rifle
1:8 twist
38inch Bartlein barrel
Running necked down .408 peterson brass
VVN570 propellant
Hornady ATIPs 390gr
TPL is 4.310 inches
Load is 124.5gr
Average temperature in SA (this is where we shoot) is 30 degrees C.
3009 fps is the average (after the barrel has set, took about 130 shots) and before that it was 2980fps on a 0.8SD over 5 shots with a 2 ES.
I now get a SD of 4 and ES of 8 over 20 shots (including cold bore).
I really struggled to get to this point and hope this can help other fellow shooters.
https://www.snipershide.com/shooting/threads/390-grain-hornady-a-tip-load-development-375-cheytac.7089759/page-3#post-10746086 Feb 14, 2023 #127 secondofangle2 said: Excessive twist is a fool’s pursuit. I know u said not your rifle. But in general Gents, I have recently won some competitions in ELR 1 and 2 mile with my .375 CT, setup is as follows: VICTRIX factory .375 CT THRONE rifle 1:8 twist 38inch Bartlein barrel Running necked down .408 peterson brass VVN570 propellant Hornady ATIPs 390gr TPL is 4.310 inches Load is 124.5gr Average temperature in SA (this is where we shoot) is 30 degrees C. 3009 fps is the average (after the barrel has set, took about 130 shots) and before that it was 2980fps on a 0.8SD over 5 shots with a 2 ES. I now get a SD of 4 and ES of 8 over 20 shots (including cold bore). I really struggled to get to this point and hope this can help other fellow shooters.
WWW.SNIPERSHIDE.COM
390 grain Hornady A-Tip load development 375 Cheytac
Few bushing does available so I doubt most know. I just FL size mine on Viersco dies and roll I have been using .402 with the ATIPS & Peterson brass so far. I???m wondering if .401 will lower my ES a bit more?
0 Comments 0 Shares 355 Views
Sponsored

We are 100% funded for October.

Thanks to everyone who helped out. 🥰

Xephula monthly operating expenses for 2024 - Server: $143/month - Backup Software: $6/month - Object Storage: $6/month - SMTP Service: $10/month - Stripe Processing Fees: ~$10/month - Total: $175/month

Xephula Funding Meter

Please Donate Here