Solar Motion Sensor Lights Manufacturers Introduces The Use Of Light Strings 2022-6-13 Solar Motion Sensor Lights Manufacturers Introduces How to connect String Light : 1. The general voltage of the LED light string is DC 12V, so it needs to use a switching power supply to supply power. The size of the power supply is determined according to the power and connection length of the LED light string. If you don't want each LED light string to be controlled by a power supply, you can buy a switching power supply with relatively high power as the total power supply, and then connect all the LED light string input power supplies in parallel (if the wire size is not enough, you can extend it). Unified by the main switching power supply. 2. The advantage of this is that it can be controlled centrally. The inconvenience is that the lighting effect and switch control of a single LED light string cannot be realized. The specific method can be measured by yourself. Through the above introduction,Solar Sensor Wall Lights Suppliers hopes that you can simply refer to the content of this article in future use. www.nbloyal.com

China Low Voltage Light Company Introduces The Details Of The Use Of Induction Lamps 2022-4-23 The use effect of solar motion sensor lights has been recognized by people from all walks of life, so more and more China Low Voltage Light Company are also making use of them. For the production of solar motion sensor lights, the most important thing is to see whether the manufacturers have mastered the key technical problems of solar motion sensor lights. If they have a good grasp of the production technology of solar motion sensor lights, the production will certainly not be too bad. Reasonable installation of controller In the production process of solar motion sensor light, the battery controller must be properly installed. It is important to know that in the production process of solar energy, the battery controller controls all electric energy, whether it is discharged or recovered, so the battery controller must pay great attention to the installation of the battery, and the installation must be reasonable, otherwise it will affect the use. Installation of lights and lanterns Lights and lanterns are the main components of solar motion sensor lights. If other components are normal, then the lights and lanterns must not be installed properly. In the process of production, all lights to be installed shall be inspected first, and only those lights that have passed the inspection and are sure to have no problem shall be installed and used. However, certain installation problems should be paid attention to during the installation process. For example, these installations do not have high technical content. The main thing is to install them in place, so that normal use will not be affected. Selection of storage battery The service life of the solar motion sensor light depends entirely on the storage battery inside. If the storage battery is selected very well, the service effect will be no problem, and the service life will be relatively long. If the storage battery is selected poorly, the service effect will be greatly reduced. There are not too many technical problems in the production of solar motion sensor lights, but the most important thing is the selection of storage batteries. In order to ensure a good effect of solar motion sensor lights, better storage batteries must be selected, and the service life can be prolonged at the same time. Otherwise, the use will be affected. Through the above introduction, China Solar Motion Sensor Light Company hopes that you can simply refer to the content of this article in future use. https://www.nbloyal.com/