Recent Updates
  • Mold Release Agent Manufacturer Introduces The Classification Strategy Of Water-based Mold Release Agents
    2022-7-13
    Water-based mold release agent mainly uses water as a medium, which has high requirements on the temperature of the mold and needs to evaporate the water inside quickly. However, water-based mold release agent has a better operating environment, low odor, and less pollution. The water-based release agent is simple to use, and is mainly safe and environment-friendly; Large coating area, less dosage, no agglomeration of release agent, rapid curing at normal temperature, rapid demoulding, water erosion resistance, and good demoulding effect. Mold Release Agent Manufacturer introduces the classification of water-based release agents:

    1. Water wax type, which is mainly used in some hollow straight pipes of golf clubs, fishing rods, and other rolling types, has the advantages that the iron core is not easy to dirty, the inner wall is smooth, easy to demould, and convenient to operate.

    2. The water-based release agent is a reactive release agent, which is mainly used for molding products and is processed in the later stage.

    Through the above introduction, Peg-12 Dimethicone Manufacturer hopes that you can simply refer to the content of this article in future use.


    www.silways.com
    Mold Release Agent Manufacturer Introduces The Classification Strategy Of Water-based Mold Release Agents 2022-7-13 Water-based mold release agent mainly uses water as a medium, which has high requirements on the temperature of the mold and needs to evaporate the water inside quickly. However, water-based mold release agent has a better operating environment, low odor, and less pollution. The water-based release agent is simple to use, and is mainly safe and environment-friendly; Large coating area, less dosage, no agglomeration of release agent, rapid curing at normal temperature, rapid demoulding, water erosion resistance, and good demoulding effect. Mold Release Agent Manufacturer introduces the classification of water-based release agents: 1. Water wax type, which is mainly used in some hollow straight pipes of golf clubs, fishing rods, and other rolling types, has the advantages that the iron core is not easy to dirty, the inner wall is smooth, easy to demould, and convenient to operate. 2. The water-based release agent is a reactive release agent, which is mainly used for molding products and is processed in the later stage. Through the above introduction, Peg-12 Dimethicone Manufacturer hopes that you can simply refer to the content of this article in future use. www.silways.com
    Potassium Methyl Siliconate,Cosmetic Sealant Factory | HZ SILWAY
    HangZhou SILWAY cosmetic sealant factory offers potassium methyl siliconate, silicone chemicals, agricultural adjuvant, and osmetic silicones , with a wide range of products, welcome to buy.
    0 Comments 0 Shares
  • Potassium Methyl Siliconate Manufacturers Introduce The Use Of 1,3,5,7-tetramethylcyclotetrasiloxane

    2022-5-17
    Potassium Methyl Siliconate Manufacturers introduces 1,3,5,7-Tetramethylcyclotetrasiloxane is a reactive siloxane containing silicon-hydrogen bonds that can undergo addition reactions with unsaturated olefins. It can be used to prepare polymethylhydrogensiloxane and functional group-modified polysiloxane with specific hydrogen content and required a number of segments; it can be used to synthesize room temperature vulcanized silicone rubber and special crosslinking of addition type liquid silicone rubber. agent; synthetic side-chain polysilicon Oxane liquid crystal polymer and various functional side chain modified silicone oil. High purity can also be used in the electronics industry as a precursor for plasma vapor deposition to form silicon dioxide, and silicon carbide insulating films. It is used to synthesize organic silicon intermediates and polymer compounds to provide active cross-linking points and is one of the indispensable raw materials for the preparation of silicone rubber.

    Compared with linear polymethylhydrogensiloxane, tetramethyl cyclo tetrasiloxane has fewer impurities, high purity, fixed chain links, and is easy to modify the design of molecules. It can be used to prepare various specific hydrogen content and required Methyl hydrogen siloxane and modified siloxane with the number of segments. Such as: used to prepare high molecular weight hydrogen-containing silicone oil; cross-linking agent for the preparation of room temperature vulcanized silicone rubber and addition type liquid silicone rubber;

    Sidechain polysiloxane liquid crystal polymer, and various high-quality side-chain modified silicone oil. Such as long-chain alkyl silicone oil; polyether silicone oil; epoxy silicone oil; carboxyl silicone oil; amino silicone oil, etc.Tetramethylcyclotetrasiloxane is also an excellent impregnating agent for optoelectronic materials.

    Through the above introduction, Mold Release Agent Wholesalers hopes that you can simply refer to the content of this article in future use.
    https://www.silways.com
    Potassium Methyl Siliconate Manufacturers Introduce The Use Of 1,3,5,7-tetramethylcyclotetrasiloxane 2022-5-17 Potassium Methyl Siliconate Manufacturers introduces 1,3,5,7-Tetramethylcyclotetrasiloxane is a reactive siloxane containing silicon-hydrogen bonds that can undergo addition reactions with unsaturated olefins. It can be used to prepare polymethylhydrogensiloxane and functional group-modified polysiloxane with specific hydrogen content and required a number of segments; it can be used to synthesize room temperature vulcanized silicone rubber and special crosslinking of addition type liquid silicone rubber. agent; synthetic side-chain polysilicon Oxane liquid crystal polymer and various functional side chain modified silicone oil. High purity can also be used in the electronics industry as a precursor for plasma vapor deposition to form silicon dioxide, and silicon carbide insulating films. It is used to synthesize organic silicon intermediates and polymer compounds to provide active cross-linking points and is one of the indispensable raw materials for the preparation of silicone rubber. Compared with linear polymethylhydrogensiloxane, tetramethyl cyclo tetrasiloxane has fewer impurities, high purity, fixed chain links, and is easy to modify the design of molecules. It can be used to prepare various specific hydrogen content and required Methyl hydrogen siloxane and modified siloxane with the number of segments. Such as: used to prepare high molecular weight hydrogen-containing silicone oil; cross-linking agent for the preparation of room temperature vulcanized silicone rubber and addition type liquid silicone rubber; Sidechain polysiloxane liquid crystal polymer, and various high-quality side-chain modified silicone oil. Such as long-chain alkyl silicone oil; polyether silicone oil; epoxy silicone oil; carboxyl silicone oil; amino silicone oil, etc.Tetramethylcyclotetrasiloxane is also an excellent impregnating agent for optoelectronic materials. Through the above introduction, Mold Release Agent Wholesalers hopes that you can simply refer to the content of this article in future use. https://www.silways.com
    WWW.SILWAYS.COM
    Potassium Methyl Siliconate,Cosmetic Sealant Factory | HZ SILWAY
    HangZhou SILWAY cosmetic sealant factory offers potassium methyl siliconate, silicone chemicals, agricultural adjuvant, and osmetic silicones , with a wide range of products, welcome to buy.
    0 Comments 0 Shares
  • Potassium Methyl Siliconate Manufacturers Introduces The Relevant Strategies Of Additives
    2022-4-23

    Potassium Methyl Siliconate Manufacturers describes the role of adjuvants:

    (1) Convert non-antigenic substances into effective antigens;
    (2) Enhance the level of circulating antibodies or generate more effective protective immunity;
    (3) changing the type of circulating antibodies produced;
    (4) the ability to enhance cell-mediated hypersensitivity;
    (5) produce experimental autoimmunity or other types of allergic diseases;
    (6) Protect antigens (especially DNA, RNA) from decomposing by enzymes in vivo.

    Through the above introduction, 1,3,5,7-tetramethylcyclotetrasiloxane Manufacturers hopes that you can simply refer to the content of this article in future use.

    https://www.silways.com
    Potassium Methyl Siliconate Manufacturers Introduces The Relevant Strategies Of Additives 2022-4-23 Potassium Methyl Siliconate Manufacturers describes the role of adjuvants: (1) Convert non-antigenic substances into effective antigens; (2) Enhance the level of circulating antibodies or generate more effective protective immunity; (3) changing the type of circulating antibodies produced; (4) the ability to enhance cell-mediated hypersensitivity; (5) produce experimental autoimmunity or other types of allergic diseases; (6) Protect antigens (especially DNA, RNA) from decomposing by enzymes in vivo. Through the above introduction, 1,3,5,7-tetramethylcyclotetrasiloxane Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.silways.com
    WWW.SILWAYS.COM
    Potassium Methyl Siliconate,Cosmetic Sealant Factory | HZ SILWAY
    HangZhou SILWAY cosmetic sealant factory offers potassium methyl siliconate, silicone chemicals, agricultural adjuvant, and osmetic silicones , with a wide range of products, welcome to buy.
    0 Comments 0 Shares
  • Polyether Modified Silicone Oil Suppliers Introduces The Use Process Of Release Agent
    2022-2-11

    Polyether Modified Silicone Oil Suppliers introduce the characteristics of release agent

    ①Releasability (lubricity). When forming a uniform film with a complex shape, the size is accurate.

    ②Good continuity of demoulding.

    ③The appearance of the molded product is smooth and beautiful, and it does not cause dust to adhere to the sticky release agent.

    ④Excellent secondary processing. When the release agent is transferred to the molded object, it has no adverse effects on the processed objects such as electroplating, hot stamping, printing, coating, and bonding.

    ⑤Easy to coat.

    ⑥ Heat resistance.

    ⑦ Pollution resistance.

    ⑧Good forming and high production efficiency.

    ⑨Good stability. When used with compounding agents and materials, its physical and chemical properties are stable.

    ⑩ Non-combustibility, low odor, and low toxicity.

    Through the above introduction,Silicone Water Repellent Suppliers hopes that you can simply refer to the content of this article in future use.

    https://www.silways.com
    Polyether Modified Silicone Oil Suppliers Introduces The Use Process Of Release Agent 2022-2-11 Polyether Modified Silicone Oil Suppliers introduce the characteristics of release agent ①Releasability (lubricity). When forming a uniform film with a complex shape, the size is accurate. ②Good continuity of demoulding. ③The appearance of the molded product is smooth and beautiful, and it does not cause dust to adhere to the sticky release agent. ④Excellent secondary processing. When the release agent is transferred to the molded object, it has no adverse effects on the processed objects such as electroplating, hot stamping, printing, coating, and bonding. ⑤Easy to coat. ⑥ Heat resistance. ⑦ Pollution resistance. ⑧Good forming and high production efficiency. ⑨Good stability. When used with compounding agents and materials, its physical and chemical properties are stable. ⑩ Non-combustibility, low odor, and low toxicity. Through the above introduction,Silicone Water Repellent Suppliers hopes that you can simply refer to the content of this article in future use. https://www.silways.com
    WWW.SILWAYS.COM
    Potassium Methyl Siliconate,Cosmetic Sealant Factory | HZ SILWAY
    HangZhou SILWAY cosmetic sealant factory offers potassium methyl siliconate, silicone chemicals, agricultural adjuvant, and osmetic silicones , with a wide range of products, welcome to buy.
    0 Comments 0 Shares
  • Mold Release Agent Manufacturers Introduces The Knowledge Of The Use Of Mold Release Agents


    Mold Release Agent Manufacturers introduces that mold release wax is the most common glass fiber reinforced plastic mold release product in the composite material industry. It is generally in the form of paste and semi-solid. It is used for product release with general surface finish requirements, especially in porous origin The use of the surface of the model also plays a role in blocking small micropores.

    In many glass fiber reinforced plastic operation applications, in order to improve work efficiency, there is a situation where mold release wax and mold release agent are used together. Especially in the demolding treatment of large glass fiber reinforced plastic products, every time the operation of demolding wax is reduced, the labor cost saved is very objective.

    It is worth noting that the combination of mold release wax and mold release agent is feasible, but the unseen effect is the most ideal. Because the demoulding products of different systems are used in combination, there is a certain risk of incompatibility. Once the two react between themselves, it may increase the difficulty of demolding and even demold failure. Even if they can be matched, there may be fish eyes. Risk of minor defects such as, imprinting, etc. Therefore, before any brand of mold release wax and mold release agent are used together, a small area test must be done to confirm that the two are compatible.

    As for the decision of collocation, you need to comprehensively evaluate the pros and cons according to your specific needs. Once the selection or test is feasible, remember to apply the release wax first, and then use the release agent. If the order is reversed, there may be the risk that the latter cannot be applied and the pre-release of the build-up layer will increase.


    https://www.silways.com/application/mold-release-agent.html
    Mold Release Agent Manufacturers Introduces The Knowledge Of The Use Of Mold Release Agents Mold Release Agent Manufacturers introduces that mold release wax is the most common glass fiber reinforced plastic mold release product in the composite material industry. It is generally in the form of paste and semi-solid. It is used for product release with general surface finish requirements, especially in porous origin The use of the surface of the model also plays a role in blocking small micropores. In many glass fiber reinforced plastic operation applications, in order to improve work efficiency, there is a situation where mold release wax and mold release agent are used together. Especially in the demolding treatment of large glass fiber reinforced plastic products, every time the operation of demolding wax is reduced, the labor cost saved is very objective. It is worth noting that the combination of mold release wax and mold release agent is feasible, but the unseen effect is the most ideal. Because the demoulding products of different systems are used in combination, there is a certain risk of incompatibility. Once the two react between themselves, it may increase the difficulty of demolding and even demold failure. Even if they can be matched, there may be fish eyes. Risk of minor defects such as, imprinting, etc. Therefore, before any brand of mold release wax and mold release agent are used together, a small area test must be done to confirm that the two are compatible. As for the decision of collocation, you need to comprehensively evaluate the pros and cons according to your specific needs. Once the selection or test is feasible, remember to apply the release wax first, and then use the release agent. If the order is reversed, there may be the risk that the latter cannot be applied and the pre-release of the build-up layer will increase. https://www.silways.com/application/mold-release-agent.html
    WWW.SILWAYS.COM
    Mold release agent-Hangzhou Silway New Material Technology Co.,Ltd.
    Silway provides raw material of mold release agent and finished product Mold release agents Manufacturers, suppliers and wholesalers choose HangZhou Silways, Ou...
    0 Comments 0 Shares
  • Cosmetic Silicones Manufacturers Introduces The Requirements For The Use Of Silicone Waterproofing Agents
    Cosmetic Silicones Manufacturers Introduces Water-soluble silicone waterproofing agents are mainly sodium methyl silicate and Potassium Methyl Siliconate, which are the first generation of silicone waterproofing agents. Its advantages are good water solubility, low price, easy use, and safety. The disadvantage is that it is strong in alkalinity and needs to absorb carbon dioxide in the air...
    0 Comments 0 Shares
  • 1
    0 Comments 1 Shares
More Stories